After Polycristalit was developed, questions raised about the technical specifications. Therefore I will give the following specifications here at this page: The density is: 1,8 kg/dm3; Sheets will weigh per m2: 10 mm thick 18kg; 16mm thick 29kg; 19mm thick 34kg; 25mm thick 45kg; The E modules: Is 8,7N/mm2; Bending strength: 55N/mm2; impact resistance 603 kj/m2; shrinkage during curing: 3mm/m. Hardness as per Mohs: 4; fire resistance Class B1 as per DIN 4102; smoke reduced; water resisting very good; hot water resisting good; weather resisting: good; light stability: good; contact to food: physiologic no problems; color resistance mostly 9 but can very dependent on color selected from RAL color chart. Polycristalit is colored in the liquid stage of the material solid throughout. There is no limitation in colors all 1.6 million colors a computer can specify are possible.

The size of individual cast Items is principally unlimited. The limits are given by handling, transportation, and some individual causes to be determined at a project planning stage. Usually for most furniture and related units a wall thickness of 20mm is a good and stable thickness, of course its possible to make 10 mm thickness or 30 till 100mm thickness. Depending on specific usage. This point shall be studied together with experienced specialists. Cast and cured Items can be mechanically worked, with woodworking hand tools as well as electric or airpressure powered hand machines. Of course also with all professional woodworking or metal working machines. in specifics: Sawing, milling, drilling, filing, grinding, polishing. Or repairing by filling any voids or scratches with liquid Polycristalit and working it by with the mentioned tools.

Tables made of Polycristalit
on sale:

square tables in different sizes ca be used in private houses, as well as for commercial places like cafe houses, restaurants, ice parlors, on ships, in hospitals, in canteens of companies etc. The table tops are made of solid Polycristalit table tops of about 18 mm thickness throughout colored in 8 variations 6 of them granulated like granite and two full colors.Color selections from next picture.To upgrade the thickness to about 35 mm a wooden frame is clued on the underside and a ash tree wood frame is glued around the edges all together is coated by a thick coat of clear polyester, grind and polished. The legs can be selected from different types and prices. And can be easily bolted on the
Table top by the attached material and description.

The table top sizes are: 90 x90 cm; 80 x 80 cm;
70 x 70 cm;60 x60 cm; 50 x 50cm 40 x 40cm
60 cm round and 40 cm round

The names of the colors are from upper left to lower right.
red-gray-black, grain size middle.
green-black, grain size fine.
gray-black, grain size middle.
solid creamy white, RAL 9001.
dark gray, grain size middle.
middle gray, grain size middle.
light gray, grain size fine.
solid light gray, RAL 7037.

Table with 4 single legs,

each 70 cm high made of stainless steel with M12mm thread and flanges already installed on the underside of the table top. Easy to install. Place the leg with the thread to the flange and turn right, as fast as you can do by hand only.

Leg with thread and flange.

4 arm leg,

comes in 2 flat double U shaped parts. This two parts can be slipped together like folding hands.
At the 4 legs on the floor arms, you find adjusting foots. On the upper side arms you find 8 holes.
With the attached 8 screws you can fix the legs onto the 8 threaded holes on pre installed metal plates.

Middle column leg

with foot plate, material: Steel chromed and polished. comes totally installed to the table top, ready to use in a as big as necessary massive cubical cardboard box.

selection of table legs Selection list: No.3
Type:

4 arm leg 50 steel chromed 70 cm high

112,50